JVC HR-DD848E Instructions Manual page 26

26
EN
2
1 2 3
6
4 5
7 8 9
0
4
RECORDING (cont.)
Receiving Stereo And Bilin-
gual Programmes
Your recorder is equipped with a Sound-Multiplex decoder (A2) and,
if you own the HR-DD848EH, a Digital stereo sound decoder
(NICAM) as well, making reception of stereo and bilingual broad-
casts possible.
When the channel is changed, the type of broadcast being
received will be displayed on the TV screen for a few seconds.
Type of Broadcast
Being Received
A2 Stereo
A2 Bilingual
Regular Monaural
*NICAM Stereo
*NICAM Bilingual
*NICAM Monaural
*Available with HR-DD848EH only.
To listen to a stereo programme, press AUDIO MONITOR
until "L" and "R" appear on the front display panel.
To listen to a bilingual programme, press AUDIO MONITOR
until either "L" or "R" appears on the front display panel (as
required).
To listen to the Standard (regular monaural) audio while
receiving a NICAM broadcast, press AUDIO MONITOR until
"NORM" appears on the front display panel. (HR-DD848EH
only)
NOTE:
"O.S.D." must be set to "ON" or the on-screen displays will not
appear ( pg. 24).
To Record Stereo And Bilin-
gual Programmes (A2)
Stereo programmes are automatically recorded in stereo on
the Hi-Fi audio track (with the normal audio track recording
mixed L and R channel sound).
Bilingual programmes are automatically recorded in bilingual
on the Hi-Fi audio track. The main soundtrack will be recorded
on the normal audio track.
NOTES:
If the quality of stereo sound being received is poor, the
broadcast will be received in monaural with better quality.
Before playing back a programme recorded in stereo, or a
bilingual programme, refer to "Soundtrack Selection" (
To Record NICAM Stereo
And Bilingual Programmes
(HR-DD848EH only)
The NICAM audio programme will be recorded on the Hi-Fi
audio track, and the Standard audio programme on the
normal audio track.
On-screen Display
ST
BIL
(none)
ST NICAM
BIL NICAM
NICAM
pg. 16).