Soundtrack Selection - JVC HR-DD848E Instructions Manual

16
EN
A/B CODE
1
4
C.RESET
AUDIO MONITOR
REW
SCENE FINDER

Soundtrack Selection

Your video recorder is capable of recording three soundtracks (HI-FI L, HI-FI R and NORM) and will play back the one you select.
During Playback
Pressing AUDIO MONITOR on the remote control changes the soundtrack being played back as follows:
TRACK
Recorder's Front Panel
L + R
L
R
NORM
L + R + NORM
q
C. MEMORY
2
2 3
5 6
7 8 9
0
4
FF
STOP
On-Screen Display
HI FI
L R
HI FI
L
HI FI
R
NORM
HI FI
NORM
Spatializer
This feature expands sound field when you play back any stereo
source or view a stereo programme while recording it.
*Spatializer has no effect on recording quality.
ACTIVATE SPATIALIZER
1
Press SPATIALIZER; the current setting will be displayed
on the screen for about 5 seconds. Pressing
SPATIALIZER while the screen shows the display
changes the setting.
NOTES:
Spatializer is effective only with a stereo TV.
The setting cannot be changed during search, still, frame-by-
frame playback or slow motion mode.
When this recorder is used as the player for editing, the
recorded audio will correspond to the Spatializer setting.
USE
For Hi-Fi stereo tapes
For main audio of Bilingual tapes
For sub audio of Bilingual tapes
For audio-dubbed tapes
For audio-dubbed tapes
PLAYBACK (cont.)
To view a stereo programme such as movies or
music, select "SPATIALIZER
spacious sound.
To view a monaural programme, select
"SPATIALIZER[ST" which simulates a stereo effect.
Select "SPATIALIZER OFF" to turn off Spatializer if
the sound becomes unnatural with either
"SPATIALIZER " or "SPATIALIZER[ST" selected.
If your TV is equipped with 3D-PHONIC and if you
use both Spatializer and 3D-PHONIC at the same
time, the sound may become unnatural; set either
function to "OFF".
The setting will remain effective even though you
turn on/off the recorder.
NOTES:
"L + R" should normally be selected. In
this mode, Hi-Fi stereo tapes are played
back in stereo, and the normal audio
track is played back automatically for
tapes with only normal audio.
For instructions on recording stereo
and bilingual programmes, refer to
page 26.
"O.S.D." must be set to "ON" or the
on-screen displays will not appear
( pg. 24).
" to create more