Others; Registration Type For Remote Devices; Standby Settings; Quick Start - Panasonic DMR-BST835 Operating Instructions Manual

Convenient functions
Basic Settings

Registration type for remote devices

• Automatic:
All connected devices on the same
network can access this unit.
• Manual:
Only registered devices can access this
unit.

Remote device list

• To register equipment manually
1 Select the device name or the MAC
Address for the device you want to
register, then press [OK].
2 Select "Yes", then press [OK].
• To deregister equipment
1 Select the registered equipment,
then press [OK].
2 Select "Yes", then press [OK].
• This function cannot be enabled when
"Automatic" is selected in "Registration type for
remote devices". (
• The maximum number of equipment that can be
registered is 16.
98
VQT4W69
above)

Others

Standby Settings

Quick Start

• On:
It is possible to start quickly from standby
mode.
• Off:
Power consumption in standby mode is
minimized. ( 117)
However, startup time from standby mode
will be longer.
• Timer Setting for Quick Start:
"Quick Start" is activated when the set time
comes.
• When "Home Network function" (
Recording function" (
for this function is fixed to "On".
• If "Off" or "Timer Setting for Quick Start" is selected, the
setting for "Unit's Display" is fixed to "Automatic". (
• The setting may be changed to "On" automatically
when the setting for video communication is changed.
( 76)

Automatic Standby

Set the time to turn the unit to standby mode
automatically.
When the unit is not operating, the unit will be
turned to standby mode once the set time has
passed.
• When "REWIND LIVE TV" is set to "On"
( 90), "Off" cannot be selected.
Automatic Standby after OTR
• On:
This unit is turned to standby mode when it
is not operated for approximately 5 minutes
after completing "Automatic Stop" or
"Recording Time" (
97) or "Remote
97) is set to "On", the setting
32).
93)