Panasonic DMR-BST835 Operating Instructions Manual page 88

Convenient functions
Basic Settings
Exchange Channel List
Exports/Imports DVB-S Channel List settings
using the SD card to share the same settings
with another DIGA which has the same function.
• Export Channel List
You can export the channel list of this unit to
the SD card.
• Import Channel List
You can import the channel list of another
DIGA from SD card.
Signal Condition
You can check the quality and strength of
signals.
• Press [2, 1] to select the LNB.
• Press [CH W X] to select the channel.
• The channels you can receive are affected by weather
conditions, seasons, time (day/night), region, length of the
cable that is connected to the aerial, etc.
• When the signal is too strong (red bar), reduce the signal
amplification at your aerial.
• When the signal is weak:
- adjust the position and direction of the dish.
- check that the current digital broadcast channel is
correctly broadcasting.
88
VQT4W69
Antenna System
You can receive several satellites if you have
DiSEqC control antenna system or single cable
router.
1 Select "Antenna System".
2 Press [2, 1] to select antenna system.
• One LNB
Compatible with Single LNB.
• MiniDiSEqC
Up to 2 LNBs can be controlled.
• DiSEqC1.0
Up to 4 LNBs can be controlled.
• Single Cable
Compatible with single cable router.
• This unit supports DiSEqC Version 1.0.
LNB Configuration
You can set LNB setting and User Band when
necessary.
• If you do not know the connected satellite,
select "No Satellite" in "Satellite". (Available
satellite will be searched in Auto Setup.)
• If you select "User defined" in "Satellite", set
"Test Transponder Frequency" manually.
Preferred Language
Select the language for multi broadcast.
If the selected language is not available, the
original language will be selected.