Manual Feed Solenoid Removal - Lexmark E360d Service Manual

4513-420, -430

Manual feed solenoid removal

1.
Remove the left side cover. See
2.
Remove the duplex. See
3.
Open the front access door, and place the printer on its right side.
Note: Be careful to not mar the finish of the printer.
4.
Remove the two screws (A).
Note: The picture below shows the E260d, E260dn printer. The manual feed solenoid removal is the same for
all models.
4-34
Lexmark™ E360d, E360dn
"Left side cover removal" on page
"Duplex removal" on page
A
4-23.
4-11.