Function Modes - Brother 885-U26 Operation Manual

—— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Function modes

Various function modes are available on this sewing machine in order to change machine settings. While
holding down the appropriate stitch selection key, turn on the sewing machine to switch the machine to
the corresponding function mode.
The machine setting that can be changed with the function modes and the operating procedures are
described below. For details, see the reference page indicated.
Machine
setting
Changing the
brightness of
the LCD
Switching on/
off the
operation beep
when an error
occurs
Changing the
language of
screens that
appear in the
LCD
Switching on/
off "stitch
width control"
Erasing the
stitch settings
saved with
both pocket
keys 1 and 2
Stitch
Setting screen
selection key
Operating procedure
1. Use the stitch length keys to
adjust the value so that it
indicates the desired
brightness.
2. Turn off the sewing machine,
and then turn it on again.
1. Use the stitch length keys to
select "ON" or "OFF".
2. Turn off the sewing machine,
and then turn it on again.
1. Use the stitch length keys to
select the desired language.
2. Turn off the sewing machine,
and then turn it on again.
1. Use the stitch length keys to
select "ON" or "OFF".
2. Turn off the sewing machine,
and then turn it on again.
1. Use the stitch length keys to
select "OK". (To stop deleting
the saved settings, select
"Cancel".)
2. Turn off the sewing machine,
and then turn it on again.

Function modes 19

1
Reference
page 20
page 117
page 20
page 88
page 56