Brother 885-U26 Operation Manual page 98

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
UTILITY STITCHES
c Select a stitch.
The stitches that can be used are
.
• For details, refer to "Selecting Stitching"
(page 62).
• Select a stitch width of 6.0 mm (15/64 inch)
or less.
d Start sewing.
CAUTION
● Select a stitch width of 6.0 mm (15/64
inch) or less, otherwise the needle may
bend or break.
● After adjusting the stitch width, slowly
turn the handwheel toward you
(counterclockwise) and check that the
needle does not touch the presser foot. If
the needle hits the presser foot, the
needle may bend or break.
Partially removing threads is called "drawnwork".
This gives a beautiful result with fabrics that have a
loose weave.
■ Drawnwork
The fabric is turned and sewn twice.
96
Pull out several threads from the fabric.
a
, , or
Attach monogramming foot "N".
b
• For details, refer to "Replacing the presser
foot" (page 38).
c Select stitch
• For details, refer to "Selecting Stitching"
(page 62).
d With the right side of the fabric facing up, sew
along the right edge of the frayed section.
e Turn the fabric around to sew the opposite
side.
f Sew along the other edge of the frayed section
so that it looks like the previous stitching.
.
N
N