JVC FST-GTK2I HR-J240E Instructions Manual page 17

1 2 3
4 5 6
7 8 9
/
0
2
1 3
¶ 7
4
1
3
OK
WEEKLY
4
TIMER
TV PROG
¡
8
¢
RETURN TO NORMAL
SCREEN
7
After confirming all information is correct, press OK
and the normal screen appears.
Repeat steps 1–7 for each additional programme.
ENGAGE RECORDER'S
TIMER MODE
8
Press TIMER. The recorder turns off automatically.
To Timer-Record Weekly Or Daily Serials . . .
. . . anytime during steps 2 through 7, press WEEKLY (NUMBER
key "9") for weekly serials or DAILY (NUMBER key "8") for
daily serials (Monday–Friday). Either "WEEKLY" or "DAILY"
appears on the screen. Pressing the button again makes the
corresponding indication disappear.
NOTES:
To timer-record a satellite broadcast through a satellite tuner
connected to the AV1 IN/OUT connector on the back of the
recorder, in step 6, set "TV PROG" to "AUX" by pressing TV
PROG +/–. Before the selected programme begins, select the
appropriate channel on the satellite tuner, then set the tuner's
timer. If your satellite tuner doesn't have a timer, leave the
unit's power switched on.
You can programme this recorder to timer-record as many as
8 programmes. If you try to programme the recorder to record
a ninth, "PROGRAM FULL" appears on screen. To record the
extra programme, you must first cancel any unnecessary
programmes ( pg. 18).
17
EN