Manual Channel Set; Delete A Channel - JVC 0703-AH-PJ-BJ Instruction Manual

Manual Channel Set

Store channels that were not stored during "Auto Set Up" (
"Auto Channel Set" ( 18).
A
Access Tuner Set screen
Perform steps 1 – 3 of "Auto Channel Set" on page 18.
B
Access Channel list
Press PUSH JOG rt to place the pointer next to "CH EDIT",
then press OK or PUSH JOG e.
C
Select position
Press PUSH JOG rt to place the pointer next to an open
channel position, then press OK or PUSH JOG e.
D
Select band
Press PUSH JOG rt to place the pointer next to the band of your
choice, then press OK to initiate Manual Channel Set.
BAND SELECT
VHF L
VHF H
UHF
[R/T]
[MENU] : EXIT
E
Set desired station
The screen to the right appears when a
station is detected.
If you do not want to store the detected
station...
Press PUSH JOG rt to place the
pointer next to "CONTINUE", then press
OK or PUSH JOG e. Channel search will resume.
If you want to store the detected station...
Press PUSH JOG rt to place the pointer next to "STORE", then
press OK or PUSH JOG e. The Channel List appears again.
The blueback screen and the TV picture currently being
broadcast appear alternately for 8 seconds each.
If you want to store another channel, repeat steps 3 – 5.
When channel search completes for that band, the Band Select
screen appears again. To set channels for other bands, select
another band and start Manual Channel Set again (
and 5).

Delete a Channel

A
Access Tuner Set screen
Perform steps 1 – 3 of "Auto Channel Set" on page 18.
B
Access Channel list
Press PUSH JOG rt to place the pointer next to "CH EDIT",
then press OK or PUSH JOG e.
C
Select channel
Press PUSH JOG rt until the channel
you want to delete begins blinking.
D
Delete channel
Press &.
To re-store it, simply press
PUSH JOG w.
Repeat steps 3 – 4 as necessary.
E
Return to normal screen
Press MENU.
Swap Channel Positions
Example: To swap CH03 and CH09.
A
Access Tuner Set screen
Perform steps 1 – 3 of "Auto Channel Set" on page 18.
MANUAL CH SET
PLEASE WAIT
VHF L 100MHZ
[MENU] : EXIT
STORE
CONTINUE
[R/T]
[MENU] : EXIT
CH FRQ SYS
01 150 BG
02 165 BG
03 195 BG
04 205 BG
05 213 BG
06 221 BG
[R/T] [&] : DELETE
[R/T] : EDIT
[MENU] : EXIT
CH FRQ SYS
01 – – – – –
02 165 BG
03 195 BG
04 205 BG
05 213 BG
06 221 BG
[R/T] [Y] : ADD
[MENU] : EXIT
B
Access Channel list
Press PUSH JOG rt to place the pointer next to "CH EDIT",
5) or
then press OK or PUSH JOG e.
C
Select position (e.g. 03)
Press PUSH JOG rt until the section of
CH "03" begins blinking, then press OK
or PUSH JOG e.
Only "03" will blink.
D
Select position (e.g. 09)
Press number keys to input "0" and "9".
The two selected channels will be
swapped.
To cancel the channel swapping, press
PUSH JOG w.
E
Store new positions
Press OK or PUSH JOG e.
Repeat steps 3 – 5 as necessary.
F
Return to normal screen
Press MENU.
Fine-Tuning Channels
A
Access Tuner Set screen
Perform steps 1 – 3 of "Auto Channel Set" on page 18.
B
Access Channel list
Press PUSH JOG rt to place the pointer next to "CH EDIT",
then press OK or PUSH JOG e.
C
Select channel to fine-tune
Press PUSH JOG rt until the channel
you want to tune begins blinking, then
press OK twice.
The "FRQ" number for that channel
starts blinking.
D
Perform tuning
Press PUSH JOG rt until the picture becomes clearer, then press
step 4
OK or PUSH JOG e.
Repeat steps 3 and 4 as necessary.
E
Return to normal screen
Press MENU.
TV System Selection — When you see the picture
but the audio can't be heard or sounds unnatural
A
Access Tuner Set screen
Perform steps 1 – 3 of "Auto Channel Set" on page 18.
CH FRQ SYS
B
07 229 BG
Access Channel list
08 237 BG
09 355 BG
10 365 BG Press PUSH JOG rt to place the pointer next to "CH EDIT",
11 374 BG
then press OK or PUSH JOG e.
12 384 BG
C
Select channel
Press PUSH JOG rt until the channel
CH FRQ SYS
you want to change its TV system begins
07 229 BG
08 237 BG
blinking, then press OK three times.
09 355 BG
The "SYS" display for that channel
10 365 BG
11 374 BG
starts blinking.
12 384 BG
D
Select TV system
Press PUSH JOG rt to select the appropriate TV system
(BG ] DK ] I). Then press OK or PUSH JOG e.
Repeat steps 3 and 4 as necessary.
E
Return to normal screen
Press MENU.
— 19 —
CH FRQ SYS CH FRQ SYS
01 150 BG 07 229 BG
02 165 BG 08 237 BG
03 195 BG 09 355 BG
04 205 BG 10 365 BG
05 213 BG 11 374 BG
06 221 BG 12 384 BG
[0-9] : INPUT CH
: FINE TUNING
[MENU] : EXIT
CH FRQ SYS CH FRQ SYS
01 150 BG 07 229 BG
02 165 BG 08 237 BG
03 195 BG 09 355 BG
04 205 BG 10 365 BG
05 213 BG 11 374 BG
06 221 BG 12 384 BG
[Y] : CANCEL
: OK
[MENU] : EXIT
CH FRQ SYS CH FRQ SYS
01 150 BG 07 229 BG
02 165 BG 08 237 BG
03 195 BG 09 355 BG
04 205 BG 10 365 BG
05 213 BG 11 374 BG
06 221 BG 12 384 BG
[R/T] : FINE TUNING
: SELECT SYSTEM
[MENU] : EXIT
CH FRQ SYS CH FRQ SYS
01 150 BG 07 229 BG
02 165 BG 08 237 BG
03 195 BG 09 355 BG
04 205 BG 10 365 BG
05 213 BG 11 374 BG
06 221 BG 12 384 BG
[R/T] : SELECT SYSTEM
: OK
[MENU] : EXIT