Initial Settings; Video Channel Set - JVC 0203-AH-CR-LG Instruction Manual

D
Perform Plug&Play setup
The TV should be set to its AV mode (with AV connection
or UHF channel 36 (with RF connection
Plug the mains power cord into a mains
outlet. Turn on the recorder. The Country
Set screen appears.
Press w e to select your country, then
press . The clock and tuner channels
will be set automatically. The time and
date can be set automatically by the
clock setting data transmitted from one of
the regular TV broadcast channels.
NOTE:
A : Austria
B : Belgium
CH : Switzerland
D : Germany
DK : Denmark
E : Spain
F : France
When Plug&Play is completed, the Confirmation screen
appears.
E
Return to normal screen
Press .
5).
I : Italy
N : Norway
NL : Netherlands
P : Portugal
S : Sweden
SF : Finland
OTHERS : Other countries

Initial Settings

5)

Video Channel Set

Video channel (RF output channel) is the channel on which your
TV receives picture and sound signals from the recorder through
the RF cable.
Perform the following steps only if interference appears in the TV
picture after you have moved to a different area or a new station
has started broadcasting in your area, or if you change the
connection from RF connection to AV connection, or vice versa.
Turn on the recorder and TV.
A
Set the channel on TV
Select the vacant position 36 on your TV.
B
Access Video Channel Set mode
Press 1 on the remote control to enter the standby mode. Press
or – on the recorder for more than 3 seconds.
and hold
C
Set video channel
Press or to set the video channel to
"OFF". Then press 1.
Press or to set the video channel to
a vacant position between 22 and 68
which is not occupied by any local station
in your area. Then press 1.
To view picture signals from the recorder, set your TV to its AV
mode.
To view picture signals from the recorder, set your TV to the
video channel.
— 6 —