System Connections; Connecting To A Satellite Receiver; Connecting/Using A Decoder; Connecting/Using A Stereo System (Hr-V505/V506/V507E Only) - JVC 0203-AH-CR-LG Instruction Manual

System Connections

Connecting to a satellite receiver

Connect the decoder to the satellite receiver's connector if you
have a decoder, EURO AV1 AUDIO/VIDEO connector to TV's
connector, and EURO AV2 DECODER connector to the satellite
receiver's connector. Then connect the satellite receiver and TV.
To record a programme via the satellite receiver, set the input
mode to "AV2" by pressing
To receive a scrambled broadcast, descramble the signal with
the decoder.
For details, refer to the instruction manual for the satellite
receiver and decoder.

Connecting/Using a decoder

You can enjoy the variety of programming that is available
through scrambled channels.
A
Set "DECODER" to "ON". (
B
Connect the recorder's EURO AV2 DECODER connector to
the decoder's 21-pin SCART connector using a 21-pin SCART
cable.
Connecting/Using a stereo system
(HR-V505/V506/V507E only)
You can listen to the soundtrack through your stereo system.
Connect the AUDIO OUT L and R connectors on the recorder to
the AUX IN or TAPE MONITOR connectors on your stereo
system's receiver or amplifier.
When listening to sound through the connected stereo system,
turn the TV's volume down completely.
and/or .
5)

Subsidiary Settings

Child Lock

You can disable the recorder's operations. While the recorder is
turned on, press . "SAFE" appears on the screen.
To release the child lock, press
"OFF" blinks on the display panel.
If any buttons on the recorder are pressed, "SAFE" appears on
the screen and blinks on the display panel.
NOTES:
— 15 —
on the remote control until the