Disassembly - Pioneer DVD-V8000 Service Manual

5

7.6 DISASSEMBLY

Note 1: Do NOT look directly into the pickup lens. The laser beam may cause eye injury.
Note 2: Even if the unit shown in the photos and illustrations in this manual may differ from your product, the procedures
described here are common.
Note 3: For performing the diagnosis shown below, the following jigs for service is required:
• Jig flexible cable 24P (GGD1111) + Extension board (GGF1575)
Diagnosis of the DVDM Assy
1
Bonnet and Tray Panel
1
Remove the bonnet by removing the eleven screws.
2
Press the STANDBY ON button to turn on the
power.
3
Press the 7 / 0 STOP OPEN/CLOSE button to
open the tray.
4
Remove the tray panel.
5
Press the 7 / 0 STOP OPEN/CLOSE button to
close the tray.
6
Press the STANDBY ON button to turn off the
power.
How to open the tray when the power cannot be on
1
Remove the six screws.
2
Remove the bottom plate.
3
Insert a · screwdriver (small) into the slit, and
slide the drive cam in the direction of the arrow.
4
Pull the tray by a hand.
1
1
1 2
1
Bottom plate
Bottom view
5
6
3
5
Note:
To remove the tray panel, disengage it from the hooks by slowly bending it
toward you in order not to damage the hooks, then pull it up.
1
3
1
Drive cam
DVD-V8000
6
7
2 6
4
Tray
3 5
Tray panel
Hook Hook
· Screwdriver (small)
· Screwdriver (small)
Bottom view
7
8
Bottom view
Slit
3
Tray 4
Bottom view
8
A
B
C
D
E
F
109