Table Of Contents - Sony Ipela SNC-CX600W Setting Manual

Introduction
－Connecting the camera with the computer via network
and checking the video
－Enter the administrator user name and password
－Changing the user name and password
1. Lighting up the white LED linked to the presence sensor
1-1. Changing the camera setting
Changing the light up time and brightness of the white LED
1-2. Checking the operation of the white LED
2. Sounding an alarm linked to the presence sensor, etc
2-1. Installing the SNC audio upload tool
2-2. Downloading the sample audio to a computer
2-3. Uploading the sample audio to the camera
2-4. Changing the setting of the camera (presence sensor link)
Setting the repeat number and volume of the audio
3. Recording a Video on microSD（Edge Storage function）
3-1. Preparing the microSD
3-1-1. When using a camera with software version 1.10.0 or earlier
3-1-2. When using a camera with software version 1.11.0 or later
3-2. Setting the clock on the camera
3-3. Changing the setting of the camera
3-3-1. When performing constant recording
3-3-2. When performing event recording
3-3-2-1. Setting a single event recording (presence sensor link)
3-3-2-2. Setting a multiple event recording
3-4. Playing back/saving/deleting the recorded video
4. Trobleshooting
4-1. To forcefully light up the white LED
4-1-1. When using a camera with software version 1.10.0 or earlier
4-1-2. When using a camera with software version 1.11.0 or later
4-2. To confirm the response of the presence sensor
4-3. To record audio when recording a video
4-4. Unsure of administrator user name and/or password
4-5. How to confirm the software version of the camera
4-6. To restore the video stopped on the browser

Table of Contents

（presence sensor /Motion detection link）
（Voice Alert function）
2