Destination Settings; Ink Absorber Counter Resetting - Canon MX700 Service Manual

<Destination settings>
In the destination settings mode, press the Stop/Reset button the specified number of time(s) according to the destination listed in the
table below, and press the ON/OFF button.
Time(s)
0 times
1 time
2 times
3 times
4 times
5 times
6 times
7 times
8 times
9 times
10 times
11 times
12 times or more
After setting the destination, confirm the model name and destination in service test print or EEPROM
information print.
<Ink absorber counter resetting>
Reset the ink absorber counter (to 0%) when the ink absorber is replaced
1) In the ink absorber counter resetting mode, press the Stop/Reset button the specified number of time(s) according to the replaced
ink absorber to set its counter to 0%, or 60% (for partial replacement).
Time(s)
0 times Main ink absorber
1 time Borderless-print ink absorber
2 times Both the main and borderless-print ink absorbers
3 times A portion of the main ink absorber (partial replacement)
2) Press the ON/OFF button to specify the ink absorber counter value.
3) After the ink absorber counter is reset, the counter value is printed automatically.
LED indication
Green (Power) No change of the destination
Orange (Alarm) Japan
Green (Power) Korea
Orange (Alarm) US
Green (Power) Europe
Orange (Alarm) Australia
Green (Power) Asia
Orange (Alarm) China
Green (Power) Taiwan
Orange (Alarm) Latin America
Green (Power) Brazil
Orange (Alarm) Canada
Green (Power) Return to the destination selection
Replaced ink absorber
Destination
33 / 41
Counter
value
Reset to 0%
Reset to 0%
Reset to 0%
Reset to 60%