Table of Contents
Advertisement
Step 4
Positioning,
Leveling, and
Securing the
Fireplace
1. Place the fireplace
into position.
2. Level the fireplace
from side to side
and from front to
back.
3. Shim the fireplace
with non-combus-
tible material, such
as sheet metal, as
necessary.
4. Secure the fire-
place to the
framing by nailing
or screwing
Step 5
The Gas Control
Systems
The diagram below shows how to properly position,
level, and secure the fireplace.
Figure 23. Proper Positioning, Leveling, and
Securing of a Fireplace
WARNING: THIS UNIT IS NOT FOR
USE WITH SOLID FUEL.
The gas control systems used with these models are
Direct Spark Ignition (DSI).
Direct Spark Ignition (DSI) System
This system includes a 120V control valve, electronic
module, and spark ignitor/flame sensor.
WARNING: CONTINUOUS 110-120
VAC SERVICE WE MUST BE
WIRED TO THE FIREPLACE
JUNCTION BOX IN A DSI SYSTEM.
WARNING: DIRECT VENT
PROPANE MODELS WITH DSI
CONTROL SYSTEMS CANNOT BE
USED IN CANADA.
22
Hide quick links:
Advertisement
Table of Contents
