Combination Switch - Mercedes-Benz E 320 Operator's Manual

Instruments
Operation
and controls

Combination switch

Combination switch
4
2
5
Low beam (exterior lamp switch position B)
1
High beam (exterior lamp switch position B)
2
Instrument
Driving
cluster display
4
3
1
5
Practical hints Car care
122
3 High beam flasher (high beam available
independent of exterior lamp switch position)
4
Turn signals, right
5 Turn signals, left
To signal minor directional changes, such as changing
lanes on a highway, move combination switch to the
point of resistance only and hold it there.
To operate the turn signals continuously, move the
combination switch past the point of resistance (up or
down). The switch is automatically canceled when the
steering wheel is turned to a large enough degree.
Turn signal failure
If one of the turn signals fails, the turn signal indicator
system flashes and sounds at a faster than normal rate.
Technical
Index
data