Switching On Or Off - Volkswagen 3.4 RNS 510 User Booklet

Booklet 3.4 RNS 510
Switching on or
oH
Anti-theft coding electronically prevents unauthorized persons from operating
the unit after it has been removed from the vehicle.
Fig.4 Entering the PIN.
Switching on or off
- Briefly press the onl off switch
:::::>
page 2, fig. 1 to switch on the unit. The
system is started and the most recent set-
tings are loaded. The most recently used
audio or video source is activated.
- Press the
onl
off switch again to switch
off the unit.
Entering the PIN
- If the keyboard field appears after the
unit is switched on, requesting that you
enter a code, the unit must be unlocked by
entering the correct, four-digit code
number. The number of possible attempts
is shown in the second line of the screen.
- Touch a number between @) and
®
on
the number pad on the screen. The
number is entered in the input line.
- After you have entered a four-digit
number, the number pad becomes grey
(inactive) and no more numbers can be
entered in the input line.
8 Quick Reference Guide
- Touch@on the screen to delete num-
bers in the input line from right to left, thus
allowing you to correct your input.
- When the correct code number is
shown in the display,
touch~.
When the unit is switched on, the las t audio or
video source used is activated at the most recent
volume setting, provided that the pre-selected
"switch-on volume" is not exceeded => page 55.
Time out
The unit will be switched off if the ignition is
turned off.
It is possible to switch the unit back
on when the ignition is switched off. The unit
will be switched off again automa tically after a
half an hour to protect the vehicle battery.
Convenience radio coding
If the unit is removed and reinstalled or the ve -
hicle battery disconnected, you will no longer
have to enter the anti-th eft coding manually as
the code number rem ains stored in the vehicle
when it is entered for the first time.
If the code numbers do not match, however, e.g.
because th e unit has been installed in another
vehicle, the electronic lock must be released
manually => page 8, "Entering the PIN ".
Code number
The code number can only be requested "on-
line" via the Volkswagen system thus making
more effective anti-theft protection possible.
Please contact your Volkswagen dealer if you re-
quire assistance.
Incorrect code number
This whole procedure can be repeated once if
you enter an incorrect code number by accident
when releasing the electronic lock. The number
of possible attempts is shown in the second line
of the scree n.
If you enter an incorrect code number again, the
unit is locked for around one hour. This means it
cannot be started (display: "System locked!
Please woit ... minutes").
The display will di sappear aft er one hour, during
which t.ime the unit must remain switched on.
The electronic lo ck can be released as described
above.
Booklet 3.4 RNS 510
The same cycle - two attempts, one hour lock-
applies again.
<Ill
Quick Reference Guide
9