Handling Data Media; Tone Function Selection Button - Volkswagen 3.4 RNS 510 User Booklet

Booklet 3.4 RNS 510
Handling data media (COs and DVDs)
To ensure perfect, high-quality sound, only clean, undamaged data media should
be used.
Cleaning data media
Hold the data medium by its edge. Avoid leaving
fingerprints on data media.
Clean data media using a soft, lint-free cloth.
Wipe the data medium in straight lines moving
from the centre out towards the edge. Stubborn
dirt can be removed with a commercial CO/OVD
cleaner or isopropyl alcohol.
CD
Caution
• Never use fluids such as petrol. paint thinner
or vinyl record cleaner. as these can damage the
surface of the data medium!
• Use standard 12 cm COs/OVDs only. 8 cm
single COs and irregular COs (known as "shape
COs") must not be inserted as they could
damage the CO/OVO drive.
• OVO plus. dual discs and flip discs are thicker
than standard COs and must not be inserted into
the unit.
• Push the COIDVD into the CD slot until it is
pulled in automatically.
• The data medium should be held straight
and at right angles to the front of the unit when
being inserted and removed from the drive.
taking care not to jam it. Surface scratches may
render the data medium unserviceable.
• Only write on data media using suitable
pens/markers. Unsuitable writing products will
damage the material.
• Do not affix stickers or similar items to the
data medium. as stickers can work loose and
damage the drive.
• Do not place data media near heat sources or
in direct sunlight.
• OVDs should always be stored in the rack
from the Genuine Volkswagen accessories range
or in the original case when not in use.
• Please be careful when removing data media
that they do not fall and scratch their surface.
<Ill
54
Important information on operating the CD player
Booklet 3.4 RNS 510
TONE function selection buHon
Changing the sound, sound focus, and volume
You can adjust the sound character and the volume of different audio sources to
suit your individual needs.
Fig.44 Main menu: Sound seHings.
In the
Sound settings='>
fig. 44 main menu.
functions can be switched off or on or are
infinitely adjustable
='>
page 5. "General
operation". An overview of setting options
and the menu structure of the
Sound set-
tings
main menu can be found at the end
of this chapter.
Calling up the Sound settings main
menu
- Press the [TONE] function selection
button to open the menu to change the
sound and volume settings ='> fig. 44.
Changing the sound character or
sound focus
- Touch ='> fig. 44 [ Treble - Mid - Bass] to
open the settings menu for changing the
"sound character".
- Touch
='>
fig. 44 [Balance - Fader] to open
the settings menu for changing the sound
balance from left to right (balance) and
from front to back (fader).
Fig.4S Menu : Volume seHings.
- Move the slid er DJ or press the
G
or (]
to change a setting.
Changing volume settings
- Touch
='>
fig. 44 {Volume ]. The
Volume
settings menu is opened => fig. 45.
- Touch the function key [Switch'on volume],
[Traffic announcements] or {Telephone
I.
to open the
corresponding settings menu.
- Move the slider
rn
or press
G
or (] to
change the displayed volume.
- Touch the {Navigation] function key to
open the
Navigation volume
menu. In the
Navigation volume
menu. you can adjust
the volume of the Nav. announcements
with [Announcement volumeJ. You can also
change the options for[Nav. announcementsJOr
specify how far the volume of other audio
sources should be lowered during a Nav.
announcement using [Audio seHings
I
='>~~~. ~
TONE function selection button 55