Synchronized Disc Recording - JVC UX-G5 Instructions Manual

3
Select and start playing the source—"FM," "AM,"
"CD," or "AUX IN."
• When recording a disc, you can also use "Synchronized
Disc Recording" (see below).
4
Start recording.
REC
On the main unit
To stop recording:

Synchronized Disc Recording

You can start and stop both disc play and tape recording at
the same time.
To record the entire disc
1
Load a disc and insert a recordable cassette.
• If the current playing source is not the CD player, press
CD 6, then 7.
2
Check the tape running direction and Reverse mode
settings on the display.
• See step 2 of "Recording on a Tape" on page 18.
3
Select the disc number you want to start recording
from.
CD CD CD CD CD
1 2 3 4 5
0 0 0 0 0
On the main unit
4
Start recording.
REC
On the main unit
• If starting recording while playing back a disc, the disc
player returns to the beginning of the current track.
To record Program Play or Random Play
1 Select Program Play (and make a program) or Random
2 Press REC to start recording.
To protect your recording
Cassettes have two small tabs on the back to protect
from unexpected erasure or re-recording.
To protect your recording, remove these tabs.
To re-record on a protected tape, cover the holes with
adhesive tape.
If the beat are heard while recording an
AM broadcast
FM MODE/
• Select "BEAT 1" or "BEAT 2" to reduce the beat.
On the main unit
Play.
MP3
BEAT 1
BEAT 2
Remote
ONLY
19