Miele T 8929 WP Operating Instructions Manual page 40

Problem solving guide
Problem
Clean plinth filter
:
appears at the
end of a
programme.
Fit plinth filter
;
appears and a
programme
cannot be
started.
Technical fault
;
Extra cooling
40
Possible cause
This is a reminder to
clean the fine filter in
front of the heat
exchanger unit under
running water.
The fine filter is not in
place or has been
incorrectly fitted.
The programme will be
cancelled if the fine
filter is removed while
the machine is in
operation.
A programme cannot
be started while there is
a fault message in the
display.
The programme has
finished but the laundry
is still cooling down.
Remedy
– Clean the fine filter. See
chapter "Cleaning and
care".
To clear the display:
– Press the OK button.
– Fit the fine filter.
– See chapter "Cleaning and
care".
– Switch the dryer off and
then on again.
– Note what is shown in the
display.
– Switch the dryer off and
then on again.
– If a programme still cannot
be started, call Miele.
You can remove the laundry
and spread it out to allow the
heat to dissipate, or leave it in
the dryer to cool down more.