Maintenance Schedule - HUSTLER TrimStar Owner's Manual

Hustler trimstar walk-behind mower
Hide thumbs Also See for TrimStar:
Table of Contents

Advertisement

IMPORTANT: Any maintenance operation that requires the removal of safety covers must be performed by a trained service
technician.
NOTES:
1. Initial oil change is after 5 hours of operation. Thereafter, change oil after every 50 hours operation. Change more often under
dusty or dirty conditions and during hot weather periods.
2. Torque initially and after first 2 hours of operation.
3. Change engine oil filter per the engine manufacturer's recommendations. Refer to Engine Owner's Manual for
recommendations and other maintenance items.
4. Service more often under dusty or dirty conditions.
5. Pump drive belt only - Inspect every 6 months or 100 hours and replace if worn or cracking is noticed. Otherwise, replace
every 200 hours or 2 years whichever comes first. Refer to Cold weather pump clutch section for tensioning information.
6. Check fuel line hoses and grommets for any cracks or leaks.
7. Initial system oil and filter change must be after the first 75 hours of use or 1 year whichever comes first. Thereafter, replace
filter and oil in each transaxle every 2 years or 200 hours, whichever comes first.
REFERENCES:
a—Refer to Engine Owner's Manual
NOTE: After completing maintenance cycle (100 hours), repeat cycle.

MAINTENANCE SCHEDULE

Hustler TrimStar
Maintenance Schedule
Refer to Fig. 4-12
SERVICE AT
INTERVALS INDICATED
Verify safety start interlock system
Visually inspect unit for loose
hardware and/or damaged parts
Visually inspect tires
Check oil level, engine (1)
Clean air intake screen (4)
Check fuel level
Blades - sharpen & securely
fastened
Discharge chute - securely in place
& in lowest position
Replace air cleaner paper element
Clean engine & transaxle
compartment
Change transaxle oil & filter (7)
Grease deck height pivots
Grease front wheel bearings
Change engine oil & filter (1)(3)
Clean cylinder & head fins (a)
Check tire pressure with a gauge
Check hydraulic oil level
Clean engine exterior (a)
Clean & regap spark plugs (a)
Check pump & deck belt tension
and condition (5)
Check fuel & hydraulic lines (6)
Check fuel tank grommet (6)
Tighten lug nuts on wheels (2)
Change fuel filter
Replace spark plugs
WEEKLY
MONTHLY
OR 50
OR 100
HOURS
HOURS
Prior to each use
Prior to each use
Prior to each use
Prior to each use or every 4 hours
Prior to each use or every 4 hours
Prior to each use
Prior to each use
Prior to each use
As needed
Daily
Every 200 hours or 2 years
X
X
X
X
X
X
X
X
X
X
X
X
4-7
ANNUALLY
OR 300
HOURS
X
X
111251CE_1109

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents