Replacing The Light Bulb - Janome Memory Craft 350e Instruction Book

q
w

Replacing the Light Bulb

Turn off the power before replacing the light bulb.
The bulb could be HOT, wait until it has cooled down
before touching it.
To remove:
Remove the cap and setscrew. Remove the faceplate.
Pull out the bulb from the socket.
e
To replace:
Insert a new bulb into the opening of the socket.
Attach the faceplate with the setscrew, and attach the
cap.
r
t
NOTE:
Do not store the machine in a high humidity area, near
a heat radiator or in direct sunlight.
Store the power supply cable in the extension table.
48
WARNINGS:
q Cap
w Setscrew
e Faceplate
r Lamp Socket
t Light bulb