Replacing The Bobbin Holder; Replacing The Light Bulb - Janome 665 Jem Gold 3 Instruction Manual

Janome 665 Instruction Manual
z
q
x
r
e
(A)
www.toews.com
46
w
q
w
(B)

Replacing the bobbin holder

z Insert the bobbin holder so that the knob fits next
to the stopper in the race.
Insert the bobbin.
q Knob
w Stopper
x Replace the needle plate, inserting the two needle
plate guide pins into the holes in the needle plate.
Tighten the screw firmly with the screwdriver.
e Guide holes
r Screwdriver

Replacing the Light Bulb

The sewing light is located behind the face plate.
Note: When replacing the bulb, unplug the machine.
Caution: Wait for the light bulb to cool down before
touching it.
Loosen the screw and remove the face plate.
q Face plate
w Set screw
(A):
* To remove: Turn the bulb counterclockwise.
* To replace: Turn the bulb clockwise.
(B):
* To remove: Push and turn counterclockwise.
* To replace: Push and turn clockwise.
Jem Gold Owners Manual/ User Guide