Using The Surround/Dsp Modes - JVC RX-D211S Instructions Manual

Using the Surround/DSP modes

Available Surround/DSP modes vary depending on the speaker settings and the incoming signals. See the table below.
• The numbers inside the parentheses following the incoming signal type indicate the number of the front channels and that of the
surround channels. For example, (3/2) indicates that the signals are encoded with three front signals (left/right/center) and two (stereo)
surround signals.
• For EX/ES/PLIIx setting, see page 23.
Incoming Signal Type
Dolby Digital Surround EX
Dolby Digital (3/2, 2/2)
Dolby Digital (3/1, 2/1, 3/0, 1/0)
Dolby Digital (Dual Mono)
1
DTS-ES Discrete*
1
DTS-ES Matrix*
DTS (3/2, 2/2)* 1
DTS (3/1, 2/1, 3/0, 1/0)
DTS (Dual Mono)
Analog/LINEAR PCM
Dolby Digital (2/0)
1 DTS 96/24 processing is not applied when the EX/ES/PLIIx setting is activated. If you want to apply the processing, set the EX/ES/
*
PLIIx setting to "OFF" (see page 23).
2
* When "S BACK OUT" is set to "
DTS+ EX.
3
* When "S BACK SPK" is set to "
the display.
* 4 When "S BACK SPK" is set to "
PLll GAME respectively.
* 5 For some Dolby Digital Surround EX software, Dolby Digital 5.1-channel reproduction ("DOLBY DIGITAL") may be applied even
<
though you have selected "
About the DSP modes
• The following DSP modes are available regardless of incoming signal type.
HALL1, HALL2, LIVE CLUB, DANCE CLUB, PAVILION, THEATER1, THEATER2
• If an incoming signal is a multi-channel (2 channel or more) digital signal, "MONO FILM" is not available.
• If "SURROUND SPK" is set to "
Virtual Surround Back
This function creates a great surround effect from behind as if you have connected the surround back speaker. The VIRTUAL SB
(Surround Back) indicator lights up on the display.
If you have connected (and activated) the surround speakers, you can use Virtual Surround Back without connecting the surround
back speaker.
Virtual Surround Back is activated when EX/ES/PLIIx is set to other than "
following signals:
– Dolby Digital Surround EX
– DTS-ES
– Dolby Digital or DTS with 4 channel or more
AUTO
3,5
DOLBY D EX* DOLBY D EX*
DOLBY DIGITAL DOLBY D EX*
3
DTS-ES DSCRT* DTS-ES DSCRT*
3
DTS-ES MATRIX* DTS-ES MATRIX*
DTS SURROUND DTS+NEO:6*
< >
1SPK ," D+PLIIx MOVIE is changed to DOLBY D EX and DTS+PLIIx MOVIE is changed to
< >
NO ," Virtual Surround Back is activated for the modes and the VIRTUAL SB indicator lights up on
< >
NO ," PLllx MOVIE, PLllx MUSIC, and PLllx GAME are changed to PLll MOVIE, PLll MUSIC, and
> <
AUTO ." In this case, select "
< >
NO ," "ALL CH STEREO" is not available.
EX/ES/PLIIx setting
ON PLIIx MOVIE
3
D+PLIIx MOVIE*
3
D+PLIIx MOVIE*
DOLBY DIGITAL
DUAL MONO
3
DTS+PLIIx MOVIE*
3
DTS+PLIIx MOVIE*
3
DTS+PLIIx MOVIE*
DTS
DUAL MONO
4
PLIIx MOVIE* /
4
PLIIx MUSIC* /
4
PLIIx GAME* /
NEO:6 CINEMA/
NEO:6 MUSIC
>
ON " to apply "DOLBY D EX."
< >
OFF " and when playing back the software including the
PLIIx MUSIC OFF
2,3 3
D+PLIIx MUSIC* DOLBY DIGITAL
2,3 3
D+PLIIx MUSIC* DOLBY DIGITAL
2,3 3
DTS+PLIIx MUSIC* DTS SURROUND
2,3 3
DTS+PLIIx MUSIC* DTS SURROUND
2,3 3
DTS+PLIIx MUSIC* DTS SURROUND
PLII MOVIE/
PLII MUSIC/
PLII GAME/
NEO:6 CINEMA/
NEO:6 MUSIC
33