Rec Lamp - Sony CCD-TRV128 Service Manual

COMMANDER
DISPLAY

REC LAMP

VIDEO EDIT
60
Customizing Your Camcorder
Note
b
• When you connect your camcorder to the wall outlet, [A.SHUT OFF] is automatically set
to [NEVER].
For TRV228/428/
GON
Select when using the Remote Commander supplied with your
camcorder.
OFF Select to deactivate the Remote Commander to prevent your
camcorder from responding to a command sent by another VCR
remote control unit.
Note
b
• The setting returns to [ON] when you have the power source disconnected from your
camcorder for more than 5 minutes.
GLCD
Select to show the displays such as the time code on the LCD screen
and in the viewfinder.
V-OUT/LCD
Select to show the displays such as the time code on the TV screen,
LCD screen, and in the viewfinder.
GON
Select to turn on the camera recording lamp on the front of your
camcorder during recording.
OFF
Select this setting in the following recording situations. The camera
recording lamp will not light up during recording.
• When you do not want the subject to be nervous about being
recorded.
• When you are recording close to the subject.
• When the subject reflects the recording lamp.
For TRV260/265:
You can select up to 20 scenes (programs) and record them in the desired order to
another recording device such as VCR (p. 69).
TRV265: