M-Audio Oxygen 49 User Manual page 7

Device ID: The Device ID function (DEV ID) allows the assignment of a unique SysEx Device ID to differentiate
between multiple MIDI devices of the same model, when sending or receiving SysEx data.
The default setting of 127 lets the keyboard respond to all incoming SysEx messages compatible with the same type
of Oxygen 49 keyboard controllers. However, if the Device ID is changed to any other value, the keyboard will only
respond to SysEx messages that contain the same Device ID number. This is useful in situations where multiple
Oxygen 49 controller keyboards are connected to the same DAW software and SysEx information needs to be sent to
a specific keyboard controller with a unique Device ID number.
1. Press Edit.
2. Press the Device ID key. The LED screen will show the current Device ID (for example, "1.2.7.").
3. Enter the new Device ID number using the number keys.
4. Press the Enter key.
NOTE: If the Device ID number of an Oxygen 49 keyboard is changed after a Memory Dump was recorded into a
DAW application, any attempts to restore it will be ignored because the numbers do not match. If you do not
remember the Device ID number used when the Memory Dump was recorded, set your Oxygen 49 keyboard to
Device ID 127 to ensure all Memory Dumps will be recognized.
Store: The Store function saves control assignment settings to one of 10 memory locations.
IMPORTANT: Storing new assignment settings will overwrite the contents of the selected memory location.
1. Press the Edit button.
2. Press the Store key. The LED screen will show the number of the last selected memory location (for example,
P.0.1).
3. Enter the number of the memory location you want to store the new settings to by using the number keys or the
"<" or ">" buttons.
4. Press the Enter key to save the changes and overwrite the previous settings of the memory location.
NOTE: The Oxygen 49 factory presets can be restored by holding down the "-" and "+" buttons during power up. This
will permanently erase all customized user settings.
Number Keys: This section of the keyboard is used to type in numerical parameter values while in Edit mode.
Enter Key: The Enter key confirms changes made and exits Edit mode.
NOTE: The Panic, Drawbar and Memory Dump functions take immediate effect when the corresponding key is
pressed. Edit mode will exit automatically.
8