Nstallation Ssembly; Foot Installation; Weight Stack Installation; Weight Stack Configurations - Paramount Fitness XL2 Series Installation & Assembly Manual

I
NSTALLATION
R F I
UBBER OOT NSTALLATION
1. Unpack the bag (usually attached to the
machine frame) that contains the rubber
feet for the base of the machine. There
are two different sizes, the elongated oval
fits the upright tubes while the wider oval
fits on the machine mainframe.
2. To install the rubber feet, tilt the machine
to one side by pushing on the upright or
mainframe.
3. Place a rubber foot onto each of the
machines floor contact points.
W S I
EIGHT TACK NSTALLATION
1. Weight plates are packaged (4) per box and are marked with the quantity and weight of the
plates. The various configurations are shown below.
Standard Optional
130 LB. 190 LB.
(12) x 10lb. plates (12) x 15lb. plates
3 boxes of B1602 3 boxes of B1603
A A
ND SSEMBLY
10 LB. Weight Plate Box
Part Number: B1602
Comprised of
(4) x 10 lb. Weight Plates
Standard
170 LB.
(16) x 10lb. plates
4 boxes of B1602

Weight Stack Configurations

Optional
250 LB.
(16) x 15lb. plates (20) x 10lb. plates
4 boxes of B1603 5 boxes of B1602
10
15 LB. Weight Plate Box
Part Number: B1603
Comprised of
(4) x 15 lb. Weight Plates
Standard Optional
210 LB. 310 LB.
(20) x 15lb. plates
5 boxes of B1603