Setting Felica Lock - Panasonic W51P Basic Manual

Setting FeliCa Lock

You can restrict the use of EZ FeliCa by setting FeliCa Lock on. You can
temporarily release the FeliCa Lock and use EZ FeliCa for a certain
period of time by holding down r for about one second while the
standby screen is displayed and entering the lock No. (quick release).
While the standby screen
is displayed, press
c4141.
Press 1 (ON), enter the
lock No., and press
c (OK).
The FeliCa Lock is set.
If the battery discharges while the FeliCa Lock is on, you will be unable to
release the FeliCa Lock. Be careful of the battery level. When your battery is
discharged, recharge the battery and release the FeliCa Lock to use EZ FeliCa.
When FeliCa Lock is set,
In case you lost W51P, you can set the FeliCa Lock by
setting Remote Auto Lock. Remote Auto Lock requires
the initial setup beforehand.
Even if you set Auto Lock, the FeliCa Lock will not be set.
Releasing FeliCa Lock temporarily (quick release)
When the FeliCa Lock is on, hold down r for about one second while the standby
screen is displayed, enter the lock No., and press c (OK).
The vibrator works, "FeliCa Lock Quick releasing" is displayed and the FeliCa Lock
is temporarily released.
If you press F or when "Quick Release" (about 5 minutes is set at the
time of purchasing) elapses, W51P returns to FeliCa Lock status.
You cannot start FeliCa-supported EZ apps while FeliCa Lock is
temporarily released.
82
appears on the standby screen.