Using The Cassette Deck (Listening To A Tape); Playing A Tape - JVC MX-K35V Instructions Manual

Using the Cassette Deck (Listening to a Tape)

RM-SMXK35V REMOTE CONTROL
1 2 3
STANDBY/ON
4 5 6
7 8 9
10 +10 FM /AM
FM MODE
1 2 3
CD CD CD CD
PROGRAM
TAPE
REPEAT TAPE A/B
/RANDOM
¢
PREV. NEXT V.INTRO HIGHLIGHT
4
7
RETURN STILL ON SCREEN
KARAOKE KEY CONTROL
SOUND
MODE
ACTIVE
VOLUME
BASS EX. MUTING
The Cassette Deck allows you to play, record, and dub audio tapes.
❏ Listening to type I, II tape is suitable for this Cassette Deck.
The use of tapes longer than 120 minutes is not rec-
ommended, since characteristic deterioration may
occur and these tapes easily jam in the pinch-rollers
and the capstans.
By pressing the TAPE 3 button, the System will come on, and if
a tape is in the deck, it will start to play. If no tape is loaded, "NO
TAPE" appears on the display, the System will come on and wait
for you to insert a tape, or select another function.

Playing a Tape

You can use either Deck A or Deck B at a time for playback.
0
1
Press the EJECT part for the deck you
want to use.
2
When the cassette holder opens, put a cas-
sette in, with the exposed part of the tape
down, toward the base of the Unit.
The tape will travel from the left to right.
Tape travelling direction
• If the cassette holder does not open, turn the System off,
then back on and press the 0 EJECT part again.
SLEEP
AUX
TAPE 3
SELECT
TAPE 3
TAPE A/B
MPX
0 EJECT
ECHO
(Deck A)
FADE
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
3-CD
NTSC/PAL
COMPATIBILITY
PLAY & EXCHANGE
MX-K35V
COMPACT COMPONENT SYSTEM
1 BIT DUAL D/A
CONVERTER
NEXT
PRESET
PREV
STANDBY/ON
CANCEL SET
STANDBY
VCD NUMBER
TUNING
PHONES
SELECT
REC START CD
REPEAT PROGRAM RANDOM /STOP REC START DUBBING
CLOCK TAPE
MIC MIC LEVEL
KEY CONTROL
/TIMER A/B
PBC RETURN
MIN MAX
EJECT
A
PLAY FULL - LOGIC CONTROL CD SYNCHRO RECORDING
3: Tape indicator
A
B
Deck indicators
3
Close the cassette holder gently.
When both Deck A and Deck B contain a tape, the last deck to
have a tape inserted is selected.
The selected Deck is shown by the Deck indicator "A" or "B".
For example, when the Deck A is selected, the Deck indicator
"A" lights up.
• To change the deck, press the TAPE A/B button. Each time
you press the button, Deck A or Deck B is alternately
selected.
3
4
Press the TAPE button.
The Tape indicator (3) blinks on the display and the tape is
played back.
The Cassette Deck automatically stops when one side of the
tape has finished playing.
To stop playing, press the 7 button.
To remove the tape, stop the tape, and press the 0 EJECT part
to open the Cassette Holder.
During playback or in Stop mode, press the ¡ (FF) button on the
Unit to fast-wind the tape onto the right side of the cassette without
playing.
During playback or in Stop mode, press the 22 (REW) button on
the Unit to fast-wind the tape onto the left side of the cassette with-
out playing.
During fast-winding the tape, the Tape indicator (3) goes out.
• The Cassette Deck automatically stops when one side of the
tape has finished playing.
❏ During fast-winding the tape, you can change the tape travelling
direction by pressing the ¡ (FF) or 22 (REW) button.
7
CD-R/RW PLAYBACK
ACTIVE
BASS EX.
SOUND
MODE
22
¡
DISC SKIP
CD CONTROL
0 EJECT
EJECT
(Deck B)
B
REC/PLAY
TAPE A/B
20