Enabling Snmp; Modifying The Ms Root Account Password - HP 800 User Manual

NOTE:
b. Select a time zone from the Time zone drop-down list.
Click ok.
2.

Enabling SNMP

To select SNMP settings:
Home window>>System configuraton>>Management server>>SNMP
settings
Select the Enable SNMP check box to select the SNMP settings.
1.
a. Enter the SNMP read community string.
b. Enter the SNMP allowed source network. The value must be either
"default" or a network specified in CIDR notation.
2. Select the Outgoing SNMP notifications check box.
3. Enter a comma-separated list of IP address or hostnames that can receive
the SNMP notifications.
4. Enter the community string used to authorize SNMP notifications from
NAC 800.
5. Select one or both of the following:
Select the Resend notifications check box and enter the resend interval,
a.
for example 60.
NAC policy tests can be configured such that if an endpoint fails the test, it
will be granted network access temporarily. In these cases, it might be
desirable not to send an SNMP notification.
b. Select the Do not send notifications when an endpoint has been granted
temporary network access check box to disable these notifications.

Modifying the MS root Account Password

To change the MS root account password:
Home window>>System configuration>>Management server
1. Enter the new password in the Root password text box in the Other settings
area.
Re-enter the password in the Re-enter root password text box.
2.
System Configuration
Management Server
3-27