NOTE:
•
Enterasys – See "Enterasys" on page 3-70.
Extreme ExtremeWare – See "Extreme ExtremeWare" on page 3-72.
•
Extreme XOS – See "Extreme XOS" on page 3-74.
•
•
Foundry – See "Foundry" on page 3-76.
HP ProCurve switch – See "HP ProCurve Switch" on page 3-78.
•
HP ProCurve WESM – See "HP ProCurve WESM xl or HP ProCurve
•
WESM zl" on page 3-81.
•
HP ProCurve 420/530 AP – See "HP ProCurve 420 AP or HP ProCurve
530 AP" on page 3-84.
Nortel – See "Nortel" on page 3-86.
•
Other – See "Other" on page 3-88.
•
Click ok.
7.
Testing the Connection to a Device
The test connection area has different options based on the switch you select:
Cisco CATOS, Cisco IOS, Enterasys, Extreme, Foundry switches – See
■
figure 3-28.
■
ProCurve, Nortel, Other switches – See figure 3-29.
To test the connection to an 802.1X device:
Home window>>System configuration>>Quarantining>>802.1X Quarantine
method radio button
You must have already added devices for them to appear in the 802.1X devices
area. You can also test the device as you add it.
System Configuration
Quarantining, 802.1X
3-63