Table of Contents
Advertisement
LCD Monitor.book Page 16 Tuesday, June 22, 2004 11:15 AM
Important Safety Instructions
Read Instructions
Read all safety and operating instructions before operating the product. Keep all safety and operating instructions for
future reference. Take note of all warnings on the product and in the operating instructions. Follow all operating and
usage instructions.
Cleaning
Unplug this product from the power source before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for
cleaning.
Attachments
Do not use attachments or accessories not recommended by Creative as they may cause hazards.
Water and Moisture
Do not use this product near any water source or water hazard.
Placement
Place the product on a stable surface. Otherwise, the product may fall and get damaged, and cause injury to a person.
Ventilation
To ensure reliable operation and to prevent overheating, do not block or cover ventilation openings and slots with
fabrics or impermeable material. Do not place the product in a built-in casing such as a bookcase or rack unless there is
proper ventilation or Creative's instructions have been adhered to.
Heat
Do not place this product near heat sources such as radiators, stoves, and other products (including amplifiers) that
produce heat.
Power Sources
This product is specifically designed for operation within the electrical range(s) specified on the product and use outside
of this range shall be at your own risk. Please contact your local electric utility company if you have any questions about
the electrical voltage at your intended location of use.
Power-cord Protection
Arrange the power-cords to minimize the risk of damage from traffic or other hazards. Pay particular attention to the
area near the plug head, the power source outlet and the connection from the product.
Lightning
Unplug the product from the power source during lightning storms or if the product is unused for long periods of time.
This will prevent lightning and power-line surge damage to the product.
Overloading
Do not overload wall outlets, extension cords, or integral power circuits as this can result in a risk of fire or electric
shock.
Object and Liquid Entry
Never push any object through the product's openings, as this can result in a fire, electric shock or damage. Do not spill
liquids on the product.
Servicing
Do not attempt to service the product yourself. Refer all servicing to qualified service personnel.
Damage Requiring Service
Unplug the product from the power source. Call for servicing when:
•
the power-supply cord or plug is damaged
•
objects have fallen through or liquids have been spilled into the product's openings
•
the product has been exposed to rain or water
•
the product does not operate normally when following the operating instructions
•
the product behaves differently
•
the product has been dropped or damaged in any way
Replacement Parts
When replacing parts, check that the service technician has used replacement parts specified by Creative or have the
same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock, or other hazards.
Safety Check
After servicing or repairing the product, get the service technician to perform safety checks to be sure that the product
is working properly.
16
Advertisement
Table of Contents
