On The Remote Control - JVC MX-DVA9 Instructions Manual

On the remote control:

1
Load discs.
• If the current playing source is not the DVD/VCD/CD
player press DVD 3, then 7 before going to the next
step.
2
Press PLAY MODE.
The play mode screen appears on the TV.
3
Press CONTROL or
move to "PROGRAM,"
then press ENTER.
The program screen appears.
• If a program has been stored in
memory, the program is called up.
• You cannot select "PROGRAM"
during Random play,
REPEAT PROGRAM
1 2
7 8
13 14
4
Press one of the disc number buttons (DVD 1,
DVD 2 or DVD 3) you want to program while
holding down SHIFT .
The selected disc number is shown on the TV screen.
5
Press the number buttons to
enter a title or track
number you want to
program.
The selected title or track number is
shown on the TV screen.
• To select number 5, press 5.
• To select number 10, press 10.
• To select number 20, press +10 then 10.
• To select number 23, press +10, +10 then 3.
Selected title or track number
Selected disc number
to
RANDOM
3 4 5 6
9 10 11 12
15 16 17 18
6
To program another title or track from the
same disc, repeat step 5.
To program another title or track from a
different disc, repeat steps 4 and 5.
Each time you select a title or track, the program item is
added up to 18 steps.
REPEAT
1
1-18
7
1-12
13
1-6
7
Press DVD 3.
The titles and tracks are played in the order
you have programed.
To stop playing, press 7.
To go to the next track, press ¢.
Even if you press 4
It just goes back to the beginning of the current title or track, but
cannot go back to the previous titles or tracks.
To modify the program
You can modify the program before or after playing.
To erase the last steps, press CANCEL while holding down
SHIFT.
• Each time you press the button, the last programmed step is
erased from the program.
To add steps in the program before playing, simply select
the disc and title/track numbers you want to add by following
steps 4 to 6 of the programming procedure.
To erase program completely, press CLEAR when the
playback is stopped.
The program you have made will be also erased,
• when you eject all the discs.
• when you unplug the AC power cord.
• when a power failure occurs.
To exit from Program play mode, press PROGRAM on the
unit after playing. The PRGM (program) indicator goes off.
The program you have made is memorized.
To check the programed contents
Press PLAY MODE. The programed contents appear on the
TV screen.
To erase the play mode screen, press PLAY MODE. The
program you have made is memorized.
– 22 –
Continued
PROGRAM RANDOM
2 3 4 5 6
2-17 3-16 1-15 2-14 3-13
8 9 10 11 12
2-11 3-10 1-9 2-8 3-7
14 15 16 17 18
2-5 3-4 1-3 2-2 1-1