JVC MX-DVA9 Instructions Manual page 20

While playing back a disc encoded with Dolby Digital,
the DOLBY DIGITAL lamp on the front panel lights up.
You can also confirm the current channel setting by
pressing DISPLAY on the unit (see page 45 for details).
• If it has multichannel signals—5.1 ch, Surround mode
is automatically activated, and the SURROUND lamp
also lights up.
• Using the on-screen menus, you can adjust the speaker
settings for 5.1ch Surround mode depending on your
room situation. (See page 34.)
Title numbers of the currently playing disc.
(Numbers exceeding 16 are not displayed.)
Current title
number
To stop playing, press 7.
• This unit can memorize the stop point of DVD, and when
you start playback again by pressing DVD 3¥8 (or
DVD 3 on the remote control), playback starts from the
beginning of a chapter previously stopped—Resume play.
To use Resume play, you need to turn on the Resume
function (see page 36).
• To stop completely, press 7 twice.
To remove the disc, press 0 for the corresponding disc tray.
To go to another chapter
Turn 4 / ¢ during playback (or
press 4 or ¢ on the remote
control).
• 4: Goes back to the beginning of
the current or previous chapters.
• ¢: Skips to the beginning of the
next or succeeding chapters.
To go to a particular title or chapter directly using the
number buttons on the remote control
• Pressing the number buttons before playback allows you to
start playing from the title number you want.
• Pressing the number buttons during playback allows you to
start playing from the chapter number of the currently
playing title you want.
• To select number 5, press 5.
• To select number 10, press 10.
• To select number 20, press +10 then 10.
• To select number 23, press +10, +10 then 3.
Current Chapter Elapsed title
number playing time
To use Time Search and Chapter Search on the TV
screen
• You cannot use this function while using Random play.
On the remote control ONLY:
1
Press PLAY MODE during play.
The play mode screen appears.
2
Press CONTROL or to move
to "TIME SEARCH" or "CHAP.
SEARCH," then press ENTER.
"GO TO _: _ _:_ _ " for Time Search
or "GO TO CHAPTER = " for
Chapter Search appears on the TV
screen.
DVD CONTROL
REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH
REPEAT
GO TO CHAPTER =
Ex.: When "CHAP. SEARCH" is selected.
3
Enter desired playing time or
chapter number by pressing the
number buttons.
• You can only use Time Search
within a currently playing title.
• To enter the time of "0:23:45,"
press 0, 2, 3, 4, 5. (Always enter
all 5 digits.)
• To enter chapter number 23, press 2, 3.
• To enter chapter number 3, press 3.
To cancel mis-entry for Time Search, press CONTROL .
Each time you press the button the last number you entry
is erased. (You cannot erase a chapter number.)
4
Press ENTER.
The unit starts playback of the selected
point.
To erase the on-screen indication, press PLAY MODE
again.
To show the on-screen indication
You can show the following information on the TV screen
while playing back a disc.
To show the on-screen indication, press
DISPLAY while playing a disc.
• Each time you press the button, the indication
on the TV screen changes as follows:
Current disc setting
Off
(No indication)
– 17 –
CHAPTER
(see page 15.)
Disc playing
information