Phone Settings - Draytek Vigor2830 Series User Manual

Packet Size
Voice Active Detector
3 . 1 3 . 3 P h o n e
3 . 1 3 . 3 P h o n e
This page allows user to set phone settings for Phone 1 and Phone 2 respectively. However, it
changes slightly according to different model you have.
Available settings are explained as follows:
Vigor2830 Series User's Guide
S e t t i n g s
S e t t i n g s
Single Codec – If the box is checked, only the selected
Codec will be applied.
The amount of data contained in a single packet. The
default value is 20 ms, which means the data packet will
contain 20 ms voice information.
This function can detect if the voice on both sides is active
or not. If not, the router will do something to save the
bandwidth for other using. Click On to invoke this function;
click off to close the function.
288