Phone Settings - Draytek Vigor2930 Series User Manual

3 . 1 0 . 3 P h o n e
3 . 1 0 . 3 P h o n e
This page allows user to set phone settings for Phone1, Phone2, ISDN1-S0 and
ISDN2-TE/S0 respectively.
Phone List
RTP
Vigor2930 Series User's Guide
S e t t i n g s
S e t t i n g s
Port – There are four phone ports provided here for you to
configure. Three (Index 1 to 3) are fixed and one (Index 4) is
configurable. Phone1 and Phone2 allow you to set general
settings for PSTN phones. ISDN1-S0 and ISDN2-TE allow
you to set common settings for ISDN network connection.
ISDN2 port is configurable. Please use the drop down list to
choose ISDN2-TE for Internet connection or choose
ISDN2-S0 (ISDN intern) for ISDN phone. In addition, you
can connect six phones to this router in certain case. Please
refer to Section 4-1 for detailed information of ISDN
phone/network connection.
If you want to enable function of ISDN On-Net/Off-Net, you
have to choose ISDN2-TE.
Call Feature – A brief description for call feature will be
shown in this field for your reference.
Codec – The default Codec setting for each port will be
shown in this field for your reference. You can click the
number below the Index field to change it for each phone port.
Tone - Display the tone settings that configured in the
advanced settings page of Phone Index.
Gain - Display the volume gain settings for Mic/Speaker that
configured in the advanced settings page of Phone Index.
Default SIP Account – "draytel_1" is the default SIP account.
You can click the number below the Index field to change SIP
account for each phone port.
DTMF Relay – Display DTMF mode that configured in the
advanced settings page of Phone Index.
Symmetric RTP – Check this box to invoke the function. To
make the data transmission going through on both ends of
local router and remote router not misleading due to IP lost
(for example, sending data from the public IP of remote router
123