Mercedes-Benz C-Class Coupe Operator's Manual page 96

Seats
94
! To avoid damage to the seats and the seat
heating, observe the following information:
keep liquids from spilling on the seats. If
R
liquid is spilled on the seats, dry them as
soon as possible.
if the seat covers are damp or wet, do not
R
switch on the seat heating. The seat
heating should also not be used to dry
the seats.
clean the seat covers as recommended;
R
see the "Interior care" section.
do not transport heavy loads on the
R
seats. Do not place sharp objects on the
seat cushions, e.g. knives, nails or tools.
The seats should only be occupied by
passengers, if possible.
when the seat heating is in operation, do
R
not cover the seats with insulating
materials, e.g. blankets, coats, bags,
seat covers, child seats or booster seats.
! Make sure that there are no objects in the
footwell or behind the seats when resetting
the seats. There is a risk that the seats
and/or the objects could be damaged.
i
Vehicles without the through-loading
feature: the head restraints cannot be
removed from the rear compartment seats.
For more information, contact a qualified
specialist workshop.
i
Further related subjects:
Rear bench seat through-loading feature
R
( page 248)
Y
Adjusting the seats manually and
electrically
You can only adjust the front-passenger seat
manually and electrically.
Backrest angle
:
Seat height
;
Seat cushion angle
=
Seat fore-and-aft adjustment
?
i
Adjust the seat cushion angle so that your
thighs are lightly supported.
Seat fore-and-aft adjustment
Lift handle ? and slide the seat forwards
X
or rearwards.
Release lever ? again.
X
Make sure that you hear the seat engage in
position.
Seat cushion angle
Turn handwheel = in the desired direction.
X
Adjusting the seats electrically
Head restraint height
:
Seat cushion angle
;
Seat height
=
I n f o r m a t i o n P r o v i d e d b y :