Storing The Parking Position - Mercedes-Benz C-Class Coupe Operator's Manual

Mirrors
102
If the "Fold in mirrors when locking" function
is activated in the on-board computer
( page 202):
Y
the exterior mirrors fold in automatically as
R
soon as you lock the vehicle from the
outside.
the exterior mirrors fold out again
R
automatically as soon as you unlock the
vehicle and then open the driver's or front-
passenger door.
i
If the exterior mirrors have been folded in
manually, they do not fold out.
Exterior mirror pushed out of position
If an exterior mirror has been pushed out of
position, proceed as follows:
Vehicles without electrically folding
X
exterior mirrors: move the exterior mirror
into the correct position manually.
Vehicles with electrically folding
X
exterior mirrors
folding button until you hear a click
followed by an impact sound.
( page 101)
Y
The mirror housing is engaged again and
you can adjust the exterior mirrors as usual
( page 100).
Y
Automatic anti-glare mirrors
The rear-view mirror and the exterior mirror
on the driver's side automatically go into anti-
glare mode if the following conditions are met
simultaneously:
the ignition is switched on and
R
incident light from headlamps strikes the
R
sensor in the rear-view mirror.
The mirrors do not go into anti-glare mode if
reverse gear is engaged.
Only for Canada.
2
2
: press and hold mirror-
Parking position for the exterior
mirror on the front-passenger side
Setting and storing the parking position
Using reverse gear
You can position the front-passenger side
exterior mirror in such a way that you can see
the rear wheel on that side as soon as you
engage reverse gear. You can store this
position.
Make sure that the vehicle is stationary and
X
that the SmartKey is in position 2 in the
ignition lock.
Press button ; for the exterior mirror on
X
the front-passenger side.
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the preset parking position.
Use adjustment button = to adjust the
X
exterior mirror to a position that allows you
to see the rear wheel and the curb.
The parking position is stored.
i
If you shift the transmission to another
position, the exterior mirror on the front-
passenger side returns to the driving
position.
Using the memory button
You can position the front-passenger side
exterior mirror in such a way that you can see
the rear wheel on that side as soon as you
engage reverse gear. This setting can be
stored using memory button M ?.
I n f o r m a t i o n P r o v i d e d b y :