Interior Wall Panel; Abs Plastics - Jayco CLASS C2013 GREYHAWK Owner's Manual

SECTION 12 – INTERIOR
To prevent permanent damage

Always use hot pads or trivets under hot pans, dishes, or heat producing
appliances such as frying pans.

Always use a cutting board; never use a knife on the countertop.

Avoid harsh chemicals such as drain cleaners, oven cleaners, etc.

Do not let cleaners with bleach set on the top. Wipe them off promptly
I W P
NTERIOR ALL
Please contact your dealership service department for assistance in repairing
décor paneling. If deep scratches occur on the wall panel, putty sticks can be used
to cover scratches on wood surfaces. These can be obtained from local hardwood
stores and lumberyards.
F
LOORING
Always test a cleaning agent in an inconspicuous area for colorfastness.
Carpet
Vacuum your carpet regularly. It is important to remove loose soil and debris while
it is on the surface.
Heavily traveled areas (i.e., walkways, areas in front of the furniture) may be
protected with small throw rugs to prolong the life of the carpet.
Prompt attention to spots and spills is essential. Remove as much of the spill as
possible. Absorb wet spills as quickly as possible by blotting repeatedly with white
paper or cloth towels.
Refer to the manufacturer's guide included in your Warranty Packet for detailed
cleaning information, or contact a cleaning professional.
Vinyl flooring
Periodically vacuum or sweep to remove dirt and gritty particles. Although most
common spills will not permanently stain the vinyl floors, they are usually easier to
remove if wiped up before they set. Simply blot with a paper towel and wipe clean
with a damp cloth. As part of a regular maintenance program, sponge mop the
entire floor. Do not use dish detergents or vinegar and water because they will dull
your floor.
To care for the vinyl floor covering, use a damp mop with water and a mild cleaner.
DO NOT SOAK THE FLOORING. Use care to avoid wetting the carpet edges. To
avoid problems of "yellowing" linoleum, the flooring manufacturer recommends
avoiding cleaners that contain oil based solvents (i.e. cleaners containing lemon oil,
Murphy's Oil Soap, etc.).
ABS P
LASTICS
ABS plastic components will retain their original beauty with reasonable care. Dust
and wipe clean with soft, damp cloth or chamois, wiping gently. Do not use gritty or
abrasive particle soaps or scouring compound to clean ABS plastic. Avoid using
"Citrus" or biodegradable cleaners which contain "D-Limonene" as they may
damage plastic materials.
ANEL
12 - 4
CLASS C MOTOR HOME
.