Switching Temporarily To A Program Type Of Your Choice Automatically - JVC GVT0125-003A Instructions Manual

3
Start searching.
PTY SEARCH
SUB TITLE
(holding then...)
Ex. When "NEWS" is selected
The receiver searches 30 preset FM stations, stops when
it finds the one you have selected, and tunes in to that
station.
• If no program is found, "NOT FOUND" appears on the
display.
• To stop searching any time during search, press PTY
SEARCH (while holding SHIFT).
To continue searching after it stops on an unwanted
station
While the indications on the display are flashing, press PTY
SEARCH again (while holding SHIFT).
Switching Temporarily to a Program Type of
Your Choice Automatically
The Enhanced Other Networks function allows the System
to switch temporarily to a preset FM station broadcasting a
program of your choice (TA, NEWS, or INFO).
• This function works while listening to an FM station
providing the required signals.
While listening to an FM station, select the program type.
TA/NEWS/INFO
ANGLE
(holding then...)
ST
ST
Remote
ONLY
TA NEWS INFO
OFF
(Canceled)
TA Traffic announcement in your area
NEWS News
INFO Program the purpose of which is to impart
advice in the widest sense
OFF The function is canceled. The PTY code
indicator (TA/NEWS/INFO) goes off.
How the Enhanced Other Networks function actually
works:
CASE 1
If a station is not broadcasting the program of your
choice
The System continues tuning in to the current station.
When a station broadcasting the program of your choice,
the System automatically switches to the station. The PTY
code indicator starts flashing.
When the program is over, the System goes back to the
previously tuned station, but the function still remains
active (the indicator stops flashing and remains lit).
CASE 2
If a station is broadcasting the program of your choice
The System automatically switches to the station. The PTY
code indicator starts flashing.
When the program is over, the System goes back to the
previously tuned station, but the function still remains
active (the indicator stops flashing and remains lit).
CASE 3
If the station currently tuned in is broadcasting the
program of your choice
The PTY code indicator starts flashing.
When the program is over, the indicator stops flashing (the
function still remains active).
«
«
«
«
23