Forced Operation; Auto Restart; Test Operation; Helpful Information - LG Deluxe High Wall Mini Split Owner's Manual

Operating Instruction

Forced Operation

Operation procedures when the remote control can't be used.
The operation will be started if the power button is pressed.
If you want to stop operation, re-press the button.
Cooling Model
Operating mode
Indoor FAN Speed
Setting Temperature 22°C(71.6°F)

Test operation

During the TEST OPERATION, the unit operates in cooling mode at high speed fan, regardless of room
temperature and resets in 18 minutes.
During test operation, if remote controller signal is received, the unit operates as remote controller sets.
If you want to use this operation, open the front panel upward and Press the power button let it be
pressed for about 3 seconds.
If you want to stop the operation, re-press the button.

Auto restart

In case the power comes on again after a power failure, Auto Restarting
Operation is the function to operate procedures automatically to the previous
operating conditions.
If you want to use this operation, press the Auto Restart Button.

Helpful information

For maximum product life and efficiency this unit has been designed, in the
heating mode, to lock-out at outdoor temperatures below 26-29degF.
At outdoor temperatures below 26-29degF. another means of heating the
conditioned space must be provided.
Fan speed and cooling capacity.
The cooling capacity indicated in the specification is the value when the fan
speed is set to high, and the capacity will be lower at low or medium fan
speed.
High fan speed is recommended when you wish to cool the room quickly.
22 Deluxe High Wall Mini Split
Room Temp. ≥ 24°C(75.2°F)
Cooling Cooling
High High
22°C(71.6°F)
FORCED FORCED FORCED
OPERATION OPERATION
Heat pump Model
21°C(69.8°F) ≤ Room Temp. < 24°C(75.2°F) Room Temp. < 21°C(69.8°F)
Healthy Dehumidification
Healthy Dehumidification Rule
23°C(73.4°F)
AUTO AUTO
RESTART RESTART
Heating
High
24°C(75.2°F)
High
Speed