Adjusting Balance (Between Left And Right); Adjusting Fader (Between Front And Rear); Setting The Bass Level; Setting The Treble Level - Alpine iLX-007 Owner's Manual

• TuneIt is downloadable from Apple's App Store.
• Time Correction, Crossover and Parametric EQ can be set only
through the TuneIt App.
• Also refer to "Applying TuneIt" on page 10.
Adjusting Balance (Between Left and
Right)
Adjust the right and left speaker volumes.
Setting item: Balance
Setting contents: L (left) 15 to R (right) 15 (Initial setting: 0)
Adjusting Fader (Between Front and
Rear)
Adjust the front and rear speaker volume.
Setting item: Fader
Setting contents: F (front) 15 to R (rear) 15 (Initial setting: 0)

Setting the Bass Level

You can emphasize or weaken the bass level.
Setting item: Bass
Setting contents: -7 to +7 (Initial setting: 0)
• The function is disabled when Defeat is set to "ON".
• The function is disabled when Bass Engine SQ is set to "ON".

Setting the Treble Level

You can emphasize or weaken the treble level.
Setting item: Treble
Setting contents: -7 to +7 (Initial setting: 0)
• The function is disabled when Defeat is set to "ON".
• The function is disabled when Bass Engine SQ is set to "ON".

Setting the Subwoofer

Turning Subwoofer ON/OFF

If an optional subwoofer is connected to the unit, make the following
setting.
Setting item: Subwoofer
Setting contents: ON / OFF (Initial setting)
• The function is disabled when Bass Engine SQ is set to "ON", and
the Bass Engine SQ parameter downloaded from TuneIt is applied.

Adjusting the Subwoofer Level

You can set the Subwoofer level when a Subwoofer is connected.
Setting item: Subwoofer Level
Setting contents: 0 to 15 (Initial setting: 0)
• If the Subwoofer setting is "OFF", the setting cannot be set.
• The function is disabled when Bass Engine SQ is set to "ON".

Setting the Subwoofer Phase

The subwoofer output phase is toggled Subwoofer Normal (0°) or
Subwoofer Reverse (180°).
Setting item: Subwoofer Phase
Setting contents: 0° (Initial setting) / 180°
• If the Subwoofer setting is "OFF", the setting cannot be set.

Setting the Bass Engine SQ

Bass Engine SQ is used to easily add impact of varying levels to your
music. Using the different levels available, the Bass impact can be
tweaked to conform to the type of music being tuned.
• Using the TuneIt App, you can download the optimal Bass Engine SQ
tuning data for your speaker system.

Turning the Bass Engine SQ ON/OFF

Set to "ON" to use the Bass Engine SQ function.
Setting item: Bass Engine SQ
Setting contents: OFF (Initial setting) / ON
• The function is disabled when Defeat is set to "ON".

Setting the Bass Engine SQ Type

You can set your favorite Bass Engine SQ type.
Setting item: Bass type
Setting contents: Standard (Initial setting) / Punch / Low Bass /
Mid Bass / Rich
Standard: A mild low-end boost to overcome road noise.
Punch: A heavier boost with more low-end impact (punch).
Low Bass:Enhance the very low bass to give a much heavier
presence without the punchy mid-bass.
Mid Bass: Focused more on mid-bass for systems with smaller
subwoofers.
Rich: Add boost to all low-end bands for a more bass-filled
sound.
• The function is disabled when Defeat is set to "ON".
• The function is disabled when Bass Engine SQ is set to "OFF".
17
-EN