Panasonic KX-NCP Series Quick Reference Manual page 29

Feature
Listen-In
*1
Busy Override
*1
Take Over
*1
TRS Change using the CA interface
Timed Reminder (Wake-up Call)
*1 This feature can be used in CA Supervisor and CA Operator Console modes only.
•
When callback ringing is used with the following features, the call must be manually answered using the
PS:
–
Make Call
–
Message Waiting Callback
–
Account Code Entry
–
Call Pickup
–
Leave Message Waiting
–
Door Open
•
The following are not supported in CA Client:
–
Call handling with a PS in Wireless XDP Parallel mode
–
Calls using the PDN/SDN button
•
When logging in to CA Client, if you enter the wrong password for a given extension number a
pre-programmed number of times, the CA Client password will be locked.
To clear the password lock:
–
For PBXs without CA Server, the extension PIN lock needs to be cleared. Clear the extension's PIN
lock using PT Manager programming. When the PIN lock is cleared, the CA Client password and CA
password lock are also cleared.
–
For PBXs with CA Server, the password lock must be cleared by using CA Web Manager. For details,
see the CA Server Quick Reference Guide.
•
The VM menu feature for a display PT should be disabled in the COS settings on the Voice Processing
System (VPS). If it is not disabled, you cannot record a VM greeting message in CA Client.
•
If the PBX settings are changed, you must restart CA Client in order for the changes to be reflected in CA
Client.
•
If CA Server is installed, and settings are changed using CA Web Manager, you must restart CA Client in
order for the changes to be reflected in CA Client.
•
Calls that you make from your extension when you are not logged in to CA Client are not recorded in the
call history. CA Server is required to record calls missed when not logged in to CA Client.
•
CA Client does not support calling restrictions between PBX tenants. The presence for other tenant's
extensions are displayed in CA Client.
Microsoft Exchange Server Integration
•
Because CA Server acquires data from the Exchange Server every 5 minutes, there may be a delay of up
to 5 minutes between the start or end of an event in an Exchange calendar and the corresponding presence
change in CA Client.
SIP Phones
•
The following SIP phones can be used with CA Client. The SIP phones must be connected to a
KX-NS1000 PBX.
–
KX-UT series SIP phones
•
The PBX's Account Code Entry feature can only be used through the function key bar of CA Client.
IP-PT/DPT SLT
ü ü
ü ü
ü ü
ü
ü ü
KX-UT
PS Series SIP
Phone
ü
Quick Reference Guide 29