Copying Files - Topfield SRP-2110 User Manual

84 Entertainment
8.2 Copying files
1. Set the Wireless Audio option to Enable.
2. Turn on your wireless headphones, and put it in pairing
mode.
3. Select the Device Scan menu to detect all available wire-
less headphones. Once detection is completed, all de-
tected wireless headphones get listed.
4. Select the entry of your choice to pair the digital receiver
with it, then you get asked for the personal identifica-
tion number of the headphones, for which, though it is
normally set to '0000', you may as well refer to the head-
phones manual.
5. Once pairing is successfully completed, you can hear the
audio from the digital receiver with the wireless head-
phones. Henceforth, you can use it at once by simply
turning on the headphones.
6. To release the connection, go into the Paired Device List
menu, and press the
choice.
NOTE
If your external hard drive is formatted in the FAT16/32 or
NTFS, it can only be read. To enable to write and read, the
hard drive must be formatted in the JFS or Ext2/3 file sys-
tem. As to how to format hard drive on the digital receiver,
refer to §7.6.
You can copy files between the built-in hard drive and external
hard drive.
To copy from the internal to the external hard drive take the
following steps:
1. Connect an external hard drive to the digital receiver.
£
¢ ¡
button on the entry of your
F1