Options For On-Screen Display - Topfield SRP-2110 User Manual

48 Preference Settings

4.8 Options for on-screen display

To adjust the transparency level of the OSD, set the OSD Trans-
parency option as you desire. Its available range is 0 to 50 per-
cent.
To adjust the display time of the information box, set the Info
Box Display Time option as you desire. Its available range is
1 to 30 seconds. If you set this option to No Info Box, the in-
formation box will not be displayed when you switch services.
However, pressing the
tion box. If you set this option to Never Hide, the informa-
tion box will always be displayed. For the information box, see
§5.2.3.
In addition, you can raise or lower the position of the infor-
mation box. Set the Info Box Position option as you desire. Its
available range is
tion, the lower the information box will be positioned.
To use an animation effect when changing menu, set the Ani-
mation option to Enable.
If any service's name is too long to fit the width of the service
name column on the services list screen, you can get it to scroll
by setting the Text Scroll option to anything other than Disable.
With the choice of Full Scroll, it will be fully scrolled until its
end disappears; with the choice of Part Scroll, it will be scrolled
To set the options for the on-
screen display (OSD), select the
Settings > OSD menu.
should see a screen like the left
figure.
button will display the informa-
10 to +3 lines. The higher you set the op-
You