Panasonic SA-AK240PL Service Manual page 19

Error Code Diagnosis Contents Description of error
ITOP UD assembly
IUDS UD assembly
HOME Cam gear/gear
assembly abnormal
LOAD Tray drive assembly
abnormal
PDRV Cam gear/gear
assembly abnormal
UDU UD base asssembly
abnormal
UDD UD base asssembly
abnormal
UD1 UD base asssembly
abnormal
F1NG Fail - safe mode. (For
open/close tray
unit(s))
UD Rack does not move
to front direction. This
lead to UD base not
raise to top position.
After TOP SW is
detected, UD rack does
not move into tray 1
position.
Cam gear does not
move to "HOME"
position under following
conditions
1. After tray is load to
"PLAY" position.
2. After tray is unload
to "STOCK"
position.
Tray unit does not move
from "STOCK" to
"PLAY" position
Cam gear does not
move from "HOME" to
"PLAY" drive position.
UD Base assembly does
not move upwards from
tray 5 to tray 2
UD Base assembly does
not move downwards
from tray 1 to tray 5.
UD Base assembly does
not move to tray 1.
When the tray open
operation is performed,
it fails to open. It will
automatically close all
trays after the time-out
by the microprocessor.
During this time when it
fails, the error code will
appear.
Automatic FL Display
19
Remarks
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
SA-AK240PL