Table of Contents
Advertisement
SA-AK240PL
The error code is automatically display after entering into self-diagnostic mode.
Error Code
Diagnosis Contents Description of error
H01
Mode SW, plunger
and capstan motor
abnormal
H02
Rec INH SW
abnormal
H03
HALF SW abnormal
F01
Reel pulse abnormal
F02
TPS error
F15
RESET SW
abnormal
F26
Transmission error
between CD Servo
LSI IC and
microprocessor IC
F61
Power Amp IC output
abnormal
IHMS
Cam gear
abnormality
ICSL
Cam gear/gear units
abnormal
ISTK
Drive rack/gear
assembly abnormal
IPLY
Drive rack/gear
assembly abnormal
REST SW: ON is not
detected
within
the
specified time.
When set to CD mode,
the sense signal does
not turn "Low", a fail safe
time
after
system
command transmission
is sent.
Upon
power
on,
PCONT=HIGH,
DCDET=L
after
checking LSI.
Cam
gear
does
not
rotate
to
"HOME"
position.
Cam
gear
does
not
rotate to "PLAY" driving
position and hence does
not drive playing tray to
"STOCK" position.
The tray drive rack does
not move to "STOCK"
position. (Tray does not
move
to
"STOCK"
position)
The tray drive rack does
not move to "PLAY"
position. (Tray does not
move
to
"PLAY"
position)
Automatic FL Display
18
Remarks
For deck mechanism unit (For deck 1/2).
Press [
] on main unit for
next error.
For deck mechanism unit (For deck 2).
Press [
] on main unit for
next error.
For deck mechanism unit (For deck 1/2).
Press [
] on main unit for
next error.
For deck mechanism unit (For deck 1/2).
Press [
] on main unit for
next error.
For CD unit (For Traverse).
Press [
] on main unit for
next error.
For CD unit (For Traverse).
Press [
] on main unit for
next error.
For power.
Press [
] on main unit for
next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on main unit
for next error.
Advertisement
Table of Contents
