The Initial Setup Menu; Using The Initial Setup Menu; Basic Settings; Clock Setting - Pioneer DVR-520H Operating Instructions Manual

The Initial Setup menu

13
Chapter 13
The Initial Setup menu

Using the Initial Setup menu

The Initial Setup menu is where you can set various
recorder options for sound, picture, language and so on.
• Press HOME MENU and select 'Initial Setup'.
Timer Recording
Disc Navigator
Copy
Disc History
PhotoViewer
• Some settings can only be changed when the
recorder is stopped. During playback these settings
are grayed out in the Initial Setup menu.
• Except for the Setup Navigator, menu screens are
exited automatically after 20 minutes of inactivity.
Note
• Some of the Initial Setup menu screens shown in this
section vary slightly depending on the country or
region of purchase.

Basic settings

Clock Setting

The date (day, month, year) and time must be set before
you can use any of the timer recording features.
The clock can be set automatically if there is a broadcast
station transmitting clock signals, or manually.
Select Auto to set the clock automatically or Manual to
display the clock setting screen.
94
En
Disc Setup
Initial Setup
Video/Audio Adjust
Play Mode
DV Record
Use the Display option to set the date and time format
(12 or 24-hour clock, etc.)
Initial Setup
Basic Clock Setting
Tuner Input Line System
Video In/Out On Screen Display
Audio In Front Panel Display
Audio Out Power Save
Language Remote Control Mode
Recording Setup Navigator
Playback
• Auto clock setting
Some TV channels broadcast time signals together
with the program. This recorder can use these
signals to set the clock automatically.
Set 'Clock Set CH' to the channel preset number
that broadcasts a clock signal, then move the
cursor down to 'Start' and press ENTER.
Initial Setup
Basic Clock Setting Clock Setting
Auto Clock Setting
Tuner Input Line System
Date
Video In/Out On Screen Display
Audio In Front Panel Display Time
Power Save
Audio Out
Clock Set CH
Language Remote Control Set
Recording Setup Navigator
Playback
If the time could not be set automatically, press
RETURN to go back to the previous screen and select
Manual.
• Manual clock setting
If no stations in your area are broadcasting time
signals, you can set the clock manually:
• Use the (cursor left/right) buttons to set your
time zone, then press ENTER.
• Press (cursor down) then use the
left/right) buttons to set summertime On or Off, then
press ENTER.
Initial Setup
Basic Clock Setting Clock Navig
Manual Clock Setting
Tuner Input Line System
Video In/Out On Screen Display
Time Zone
Audio In Front Panel Display
Audio Out Power Save
Summer Time
Language
Remote Control Set
Recording
Setup Navigator
Playback
Auto
Manual
Display
AM
Pr 1
Start
(cursor
1/2
USA
Alaska
Off