Raymarine ST60 Owner's Handbook Manual page 39

26
Note: The User calibration entry screen will time out to the main
display after 7 seconds.
3. Referring to the User calibration diagram and information in this
Depth offset
User calibration
Chapter, carry out the calibration procedure. Use the depth key to
cycle from screen to screen and the offset and reset keys to set
the required values at each screen.
depth
Hold down
for approximately 2 seconds
Entry
screen
Depth
units
depth
At each screen use
offset
either
to set the required values
Shallow
alarm lock
depth
ST60 Depth Instrument Owner's Handbook
and alarm
depth
reset
or
depth
Pop-up pilot
depth
D4351-1