Sony HVR-Z7J Service Manual page 303

Soldering (2)
END Sensor (Q901)
Two solderings
FP-031
flexible board
T Reel sensor (H902)
Four solderings
Use the rubber finger tip cover.
Lead-free solder
∅
Wire type : 0.6
Soldering iron : 941 made by Hakko Mfg.
Soldering iron tip : T1-1BC
Soldering iron tip temperature
Soldering iron tip contacting time: within 2 sec.
Be careful not to create the hollow soldering,
bridge formation, and the holder's claw must
not be melt.
FP-031 Flexible adhesive sheet
HVR-Z7J/Z7U/Z7N/Z7E/Z7P/Z7C
Use the rubber finger tip cover.
Lead-free solder
Wire type
Soldering iron
Soldering iron tip: T1-1BC
Soldering iron tip
Soldering iron tip contacting time within
2 sec.
: 300 ± 10 ° C
∅
: 0.6
: 941 made by Hakko Mfg.
temperature: 300 ± 10 ° C
S Reel sensor (H901)
Use the rubber finger tip cover.
Lead-free solder
Wire type
Soldering iron
Soldering iron tip: T1-1BC
Soldering iron tip
Soldering iron tip contacting time within
2 sec.
Four solderings
FP-228 Flexible adhesive sheet
(DEW SENSOR)
Soldering at the
two locations
TOP Sensor (Q902)
Two solderings
FP-031 flexible
board
∅
: 0.6
: 941 made by Hakko Mfg.
temperature: 300 ± 10 ∞ C
FP-031 Flexible
Mecha chasis
adhesive sheet
Soldering
FP-228 Flexible adhesive sheet
HELP